1.Product Warranty(1) Warranty Period 1) Product warranty is one year after date of purchase. 2) For LED power supply units, the warranty period is three years.(2) Coverage 1) Product will be repaired at free of charge if the product is damaged within the warranty period under proper handling written in the handling manual and warning labels. * Lamps, batteries, and other consumables are excluded. * Only half of the warranty period be covered if the equipment is used for 24-hours or used extensively (more than 20 hours) a day. 2) If the product cannot be repaired, it will be replace with the same product or product of the same grade. 3) The Warranty only covers repair and replacement, and do not cover shipping and other fees.2.When applying for repair(1) During the Warranty PeriodIndicate the Warranty and proof of purchase to the sales store and ask for repair.(2) After the Warranty PeriodPlease consult with the sales store.If its function can be repaired, repair can be provided with a charge.ODELIC Product WarrantyInternational protection (IP) code· IP code is stipulated by IEC60529 “Degrees of protection provided by enclosures”.· IP code indicates only outdoor fixtures.· IP00Second characteristic numeral (0-8)First characteristic numeral (0-6)International protection· Without IPcode indication, fixtures are defined as “IP20”.IPHorizontal illuminanceLight Distributions3m1.8mφ3.6m3.6mφ3.6m50 lx垂直な鉛直面（実線）平行な鉛直面（破線）50 lx(Example)Installing fixtures on 3m height ceiling in this case, the length between each fixtures are recommended 3.6m so that the average of lux level on the floor ensure 50 lx (Reference number for your installation distance between fixtures).First characteristic numeralDegree of protection Brief descriptionDenition 0Non-protected-1Protected against solid foreign objects of 50mm diameter and greaterThe object probe, sphere of 50mm diameter, shall not fully penetrate 1)2Protected against solid foreign objects of 12.5mm diameter and greaterThe object probe, sphere of 12.5mm diameter, shall not fully penetrate 1)3Protected against solid foreign objects of 2.5mm diameter and greaterThe object probe, sphere of 2.5mm diameter, shall not penetrate at all 1)4Protected against solid foreign objects of 1mm diameter and greaterThe object probe, sphere of 1mm diameter, shall not penetrate at all 1)5Dust-protectedIngress of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the apparatus or to impair safety 6Dust-tight No ingress of dust 1) The full diameter of the object probe shall not pass through an opening of the enclosure.Degrees of protection against solid foreign objects indicated by the rst characteristic numeral.Second characteristic numeralDegree of protection Brief descriptionDenition 0Non-protected-1Protected against vertically falling water drops Vertically falling drops shall have no harmful effects2Protected against vertically falling water drops when enclosure tilted up to 15°Vertically falling drops shall have no harmful effects when the enclosure is tilted at any angle up to 15°on either side of the vertical3Protected against splashing water Water sprayed at an angle up to 60°on either side of the vertical shall have no harmful effects4Protected against splashing water Water splashed against the enclosure from any direction shall have no harmful effects5Protected against water jets Water projected in jets against the enclosure from any direction shall have no harmful effects6Protected against powerful water jets Water projected in powerful jets against the enclosure from any direction shall have no harmful effects7Protected against the effects of temporary immersion in waterIngress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time 8Protected against the effects of continuous immersion in waterIngress of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7 Degrees of protection against water indicated by the second characteristic numeral.The graph is expressed as the vertical axis of each level of heights with light spread of horizontal illuminance from the fixture.3 Vertical illuminance (lx)1 Beam AngleIndicate a half-luminous distribution from the center luminous intensity.2 Horizontal illuminance (lx)Arbitrary heights of horizontal illuminance.4 Fixture installation pitch (Max length) (m)Recommended installation pitch for one to another.1234012121.202.403.604.80457114502898°98°25255050100100200200D-1563L(m)E(lx)D(m)HeightHorizontal Distance134220190206230
元のページ ../index.html#231